Once you have check-marked the sole prerequisite of an unlocked bootloader, you will be in a position to flash custom/GSI ROMs, install a custom recovery like OrangeFox / TWRP, or get your hands on tons of custom binary. However, it is the ability to gain administrative access that is forever at the top o the priority queue of the tech enthusiast. If you also echo this same thought process, then this guide is all that you would need. Given here are the detailed steps to root your Redmi K50/Pro using the Magisk patched boot.img file. Follow along.
Benefits and Risks of Rooting
Once you root your device by flashing the Magisk patched boot.img via Fastboot Commands, you will be in a position to try out a plethora of customizations on your device. These include the likes of flashing custom ROMs, installing a custom recovery like TWRP, or flashing a custom kernel. Along the same lines, you could also flash Magisk Modules, Xposed Framework, Substratum Themes, Viper4Android, and the likes. However, this is just one side of the story. Carrying out this process also has its downsides. First off, the process requires an unlocked bootloader. Doing so will wipe off all the data and could nullify the device’s warranty as well. Likewise, WideVine L1 will be degraded to L3, resulting in the inability to stream Netflix in HD [FIXED]. Then the SafetyNet will be triggered, which might cause issues with banking apps [FIXED]. So if all that’s well and good, then let’s get started with the steps to root the Redmi K50/Pro via Magisk.
How to Root Redmi K50/Pro via Magisk
The below instructions are listed under separate sections for ease of understanding. Make sure to follow the same sequence as mentioned. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.
Install Android SDK
To begin with, install the Android SDK Platform Tools on your PC. This is the official ADB and Fastboot binary provided by Google and is the only recommended one. So download it and then extract it to any convenient location on your PC. Doing so will give you the platform-tools folder, which will be used throughout this guide.
Enable USB Debugging and OEM Unlocking
Next up, you will have to enable USB Debugging and OEM Unlocking on your device. The former will make your device recognizable by the PC in ADB mode. This will then allow you to boot your device to Fastboot Mode.
On the other hand, OEM Unlocking is required to carry out the bootloader unlocking process. So head over to Settings > About Phone > Tap on MIUI Number 7 times > Go back to Settings > System > Developer Options > Enable USB Debugging and OEM Unlocking.
Unlock Bootloader on Redmi K50/Pro
You will also have to unlock the bootloader on your Redmi K50/Pro if you wish to root it via Magisk. Do keep in mind that doing so will wipe off all the data and might make the device’s warranty null and void as well. So if that’s well and good, then refer to our guide to Unlock Bootloader on any Xiaomi Device.
Download Redmi K50/Pro Fastboot ROM
Next up, download the Fastboot ROM for your device. Make sure to download the same firmware version that is currently installed onto your device. You may either download the same from the MI official site or via third-party sites such as Xiaomi Firmware Updater. As for this guide, I am using Redmi K50 Pro China MIUI V13.0.13.0.SLKCNXM [Direct Download Link].
Extract Stock Boot.img
Once you have downloaded the ROM, extract it to any convenient location on your PC. Once extracted, go to the Images folder. Within that, you should see all the partition files in IMG format. Copy the boot.img file and send it to your device.
Patch Redmi K50/Pro Stock Boot.img via Magisk
Boot Redmi K50/Pro to Fastboot Mode
You should now see the famous MI Bunny Logo along with the Fastboot text written underneath it, signifying that the device has successfully booted to Fastboot. Let’s now move over to the final set of instructions and root Redmi K50/Pro via Magisk.
Flash Magisk Patched Boot.img and Root Redmi K50/Pro
That’s it. These were the steps to root the Redmi K50/Pro via Magisk without using TWRP Recovery. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.
How to Enable 5G in Android in an Unsupported CountryHow to Enable VoLTE and VoWiFi on Xiaomi (Root/Non-Root)Enable Hidden Add Multiple Users Option in MIUI (Xiaomi)Enable Choose Update Package | Reboot to Recovery Mode: MIUI Xiaomi
About Chief Editor
